Search found 1847 matches

Go to advanced search

by michael
Wed Nov 22, 2017 10:37 pm
Forum: Blether
Topic: Still modelling Gn15 or just looking?
Replies: 7
Views: 87

Re: Still modelling Gn15 or just looking?

Hi Chris, I am apparently active in this area again, after a sojourn of a little while from this form of modelling.

Michael
by michael
Wed Nov 22, 2017 7:43 am
Forum: Modelling Matters
Topic: Macton II
Replies: 30
Views: 449

Re: Macton II

Peter, glad you like the tool. I soldered up most of the track sections ready for the installment once the ends are squared up. ver 6 macton II overallx1024.jpg I think that the turntables will work out fine, I am going to see how easy it will be to operate them from below without using motors. ver ...
by michael
Tue Nov 21, 2017 3:39 pm
Forum: Modelling Matters
Topic: THREADS REVIVED WITH PHOTOS
Replies: 1
Views: 36

Re: THREADS REVIVED WITH PHOTOS

Chris, thank you for doing this, Perhaps your example will lead to someone in other forums taking on the task as well. What photobucket did was clearly despicable, without grandfathering the images already in forums, or giving those who had them some time to make appropriate changes. They really hav...
by michael
Tue Nov 21, 2017 3:27 pm
Forum: Modelling Matters
Topic: Macton II
Replies: 30
Views: 449

Re: Macton II

Hi Peter, thanks. The device is a custom third hand that I designed to hold just about anything instead of the cheap alligator clip type that are sold in hobby shops. I did come up with a production model that sells for $175 Canadian. The production model comes with a choice of a couple of toolmaker...
by michael
Tue Nov 21, 2017 6:20 am
Forum: Modelling Matters
Topic: Macton II
Replies: 30
Views: 449

Re: Macton II

Back home now, Are you planning on connecting the 3 story building with a walkway to the other building? Marty The old walkway suffered a fair bit of damage but I did like the concept. I am still cogitating about the new stone building, I am not sure about the stone it might end up either sandstone ...
by michael
Mon Nov 20, 2017 6:43 pm
Forum: Modelling Matters
Topic: Simplicity Sidings
Replies: 522
Views: 200873

Re: Simplicity Sidings

Chris thanks for doing this. I gnow that Steve used the Brick Printies that I came up with for some early Macton work here they are again

new macton bricks office.jpg
new macton bricks office.jpg (414.14 KiB) Viewed 58 times


new macton door  bricks.jpg
new macton door bricks.jpg (731.9 KiB) Viewed 58 times


new macton bricks paintshop.jpg
new macton bricks paintshop.jpg (508.85 KiB) Viewed 58 times


Michael
by michael
Mon Nov 20, 2017 7:13 am
Forum: Modelling Matters
Topic: Eaton Hall & Co cakebox layout
Replies: 6
Views: 129

Re: Eaton Hall & Co cakebox layout

I like your solution Peter, it looks less cluttered, architecturally.

Michael
by michael
Sun Nov 19, 2017 4:07 pm
Forum: Modelling Matters
Topic: Pet (it's all Ralph and Gerry's fault)
Replies: 116
Views: 42618

Re: Pet (it's all Ralph and Gerry's fault)

I have been in touch with the national railway museum and have ordered a crew drawing of pet I understand that it is more detailed than the drawing in the crew narrow gauge system book.
I will be continuing my set of cad drawings.

Michael
by michael
Sat Nov 18, 2017 4:44 am
Forum: Modelling Matters
Topic: Macton II
Replies: 30
Views: 449

Re: Macton II

This is on my phone so it's not going to be long, hi Marty thanks for the great compliment.
Peter it's from a drawing in Corel just a paper sheet.

Michael
by michael
Fri Nov 17, 2017 4:10 pm
Forum: Modelling Matters
Topic: Macton II
Replies: 30
Views: 449

Re: Macton II

I did a quick print this morning of a stone like multi story building to see what a different building would look like. i also removed the gantry at the back and am thinking that a smaller mobile type over the track to compliment the large beam type off the brick structure would give a little more f...
by michael
Fri Nov 17, 2017 3:11 pm
Forum: Modelling Matters
Topic: Haywards Estate Railway
Replies: 555
Views: 199483

Re: Haywards Estate Railway

Enjoy the show Gavin

Michael
by michael
Fri Nov 17, 2017 7:06 am
Forum: Modelling Matters
Topic: Macton II
Replies: 30
Views: 449

Re: Macton II

I managed to get out the to the shop just before I had to head downtown for a meeting. took a few pictures and this evening did a bit of cutting and pasting.

ver 4 macton II.x1024.jpg
ver 4 macton II.x1024.jpg (75.45 KiB) Viewed 111 times


I like the way this is shaping up I will need to make some more railings for sure.

Michael
by michael
Thu Nov 16, 2017 7:31 pm
Forum: Modelling Matters
Topic: Macton II
Replies: 30
Views: 449

Re: Macton II

Hi Bill, I have not been out to the modelshop yet this morning, I am going to take some pictures of the railing straight on and also the wall with the columns, the existing columns might be too short so if I included some columns they would likely need to be taller. That said a slightly lower railin...
by michael
Thu Nov 16, 2017 3:21 pm
Forum: Modelling Matters
Topic: Macton II
Replies: 30
Views: 449

Re: Macton II

Bill funny you should suggest a see through fence, because I was thinking the same thing. Last night i was thinking a chain link type fence, but given the nature of the gate I think that a high wrought iron railing would be in keeping with the overall design,but just a little simpler. Just the raili...
by michael
Thu Nov 16, 2017 7:20 am
Forum: Modelling Matters
Topic: Macton II
Replies: 30
Views: 449

Re: Macton II

Hi peter here is a tweaked version it is called ver 3 Macton ver 3 Macton.jpg When I get out to the shop in the morning I will do some 3d massing.and remove the corrugated iron behind the gate in the yard and slide it further to the left in front and also see how it looks behind the stone pillars Mi...
by michael
Thu Nov 16, 2017 6:49 am
Forum: Modelling Matters
Topic: Macton II
Replies: 30
Views: 449

Re: Macton II

Hi Peter, what I like about your suggestion is that it gives the middle building some sense of volume by making the return. And placing another sandstone building at the gate end works nicely too. which is like the original in that the drawing office was next to the gate. I shall do some more tweaki...
by michael
Wed Nov 15, 2017 7:36 pm
Forum: Modelling Matters
Topic: Macton II
Replies: 30
Views: 449

Re: Macton II

Peter I was clutching at straws with the left corner. i am thinking that it needs to be simple and clean, an extension of the asbestos siding perhaps.

ver2-O Macton IIX1024.jpg
ver2-O Macton IIX1024.jpg (68.21 KiB) Viewed 212 times


this might work better.

Michael
by michael
Wed Nov 15, 2017 5:40 pm
Forum: Modelling Matters
Topic: Macton II
Replies: 30
Views: 449

Re: Macton II

Thanks Bill, yes the gate is one of my favourite pieces of modelwork. Here are some new pics showing two versions I am inclined to go with version 2 as it more closely resembles the original Macton. new layout 2017.x1024.jpg Here the gate has been moved and seems to be a more logical placement. ver ...
by michael
Wed Nov 15, 2017 6:24 am
Forum: Modelling Matters
Topic: Macton II
Replies: 30
Views: 449

Re: Macton II

Thanks for the encouragement Bill, doc, and Peter. Being able to play with the parts of the old Macton, was fun this evening, while taking a break from renovating the living room in the new home. After doing a drawing of the new layout early this morning as a guide I placed all of the good pieces on...
by michael
Tue Nov 14, 2017 9:20 pm
Forum: Prototype Prattles
Topic: This has got to be modelled!
Replies: 6
Views: 509

Re: This has got to be modelled!

Looks like dual gauge to me.

Michael
by michael
Tue Nov 14, 2017 3:03 pm
Forum: Modelling Matters
Topic: Back on the Drawing Board
Replies: 123
Views: 44327

Re: Back on the Drawing Board

good morning Bill, catching up I like the way you finished the left side, some familiar looking features there. It is a pity that photobucket went the way they did, it ruined a lot of threads on various forums.

Michael
by michael
Tue Nov 14, 2017 7:36 am
Forum: Modelling Matters
Topic: Macton II
Replies: 30
Views: 449

Macton II

This evening I looked hard at the old original section of Macton, an decided to retire the base structure. This provided the opportunity to make it just a bit wider from 12 inches to 16 inches keeping the original length of 48 inches. IMG_0491x1024.jpg I used a 1/4 inch ply for the top and 3/4 inch ...
by michael
Tue Nov 14, 2017 5:12 am
Forum: Prototype Prattles
Topic: This has got to be modelled!
Replies: 6
Views: 509

Re: This has got to be modelled!

I like the look of the buildings suggested that Bertrand go take a look.

Michael
by michael
Tue Nov 14, 2017 4:58 am
Forum: Modelling Matters
Topic: Longstone 2
Replies: 95
Views: 6647

Re: Longstone 2

Hello Graham, I just read through your entire build. I like a lot of the small details and Like Chris was impressed with the backdrop scenes in the road next to the store. I also like the colour of your locos and coaches. I will be doing some rework myself on an old layout and as some mentioned in o...
by michael
Mon Nov 13, 2017 9:24 pm
Forum: Blether
Topic: I'm back in the big city
Replies: 3
Views: 137

I'm back in the big city

Well after a great job by Tom after some issues with not being able to log in to my account I am now reinstated. Judy and I spent 9 years plus in the country by the lake, as nice as it was the long distance driving for anything food supplies you name it, we finally decided to move back to Edmonton. ...

Go to advanced search