The Much Knattering & Far Twaddle Light Railway

For discussion of the issues faced when building a model or layout - how to replicate wood, what glues to use, exactly how much weathering can a Gnat take, a good source of detailing accessories - you get the picture, I'm sure.

Moderator: GnATTERbox Moderators

Mark Goodwin
Seasoned Campaigner
Seasoned Campaigner
Posts: 408
Joined: Wed Jun 11, 2003 7:25 pm
Location: Squamish, B.C. Canada

The Much Knattering & Far Twaddle Light Railway

Postby Mark Goodwin » Fri Apr 21, 2017 2:22 am

Hi fellow GN 15 modellers,

Having spent a great deal of time building Smallbrook "Emett" locomotives, designing a few of my own, building a diorama (Chipping Clinker Engine Shed) and other things to do with trains, I thought it was time I started to building somewhere to run them.

The design is a simple oval, with a passing loop and some sidings. The sidings may house some local industries such as the "Buffers End Polish Company" and the "General Custard Refining Company Ltd". Here's the track plan. I have followed practice over this side of the pond to use extruded polystyrene insulation as the base and to use "Woodland Scenics" HO scale foam underlay. The frame consists of three "Brilliant Baseboard" modules with a standard 8' X 4' plywood sheet 1/2" thick. It was sad that the creator and owner of "Brilliant Baseboards" passed away not long after I bought them. The legs I made myself
Image

Here's what the stock and buildings look like on the 8' x 4' board.
Image

Before I begin to lay the track, I had to work out what automatic coupling system to use. This was quite hard as the Smallbrook Oysterbeach coaches have a high roof overhang and the buffers are quite long. The solution turned out to be simple. I used "Dapol" OO scale NEM coupler pockets and Kadee HO scale #20 NEM extra long couplers. The curves on the layout are 21" radius and the distance between the coaches with the couplers has sufficient distance to prevent roof and buffer lock.

Image

Track laying will begin soon followed by framing for the scenery - the passing loop without the sidings will be concealed and used as a fiddle yard.
I think I started in this scale back in 2006 when I purchased my first Smallbrook Nellie from Mike Rayner, so 11 years later the layout has begun.....Huzza !!!
Best regards,
Mark Goodwin

User avatar
docnjoj
Demi-Millegniumer
Demi-Millegniumer
Posts: 722
Joined: Sun Jan 14, 2007 3:03 pm
Location: Fairhope AL
Interests: used to model 7/8 scale but now am definitely hooked on GN15 as my only scale until now. G9 has appeared.

Re: The Much Knattering & Far Twaddle Light Railway

Postby docnjoj » Fri Apr 21, 2017 10:32 am

Very pretty engine and the car. Keep it up!
otherDoc
David (Doc)
Fairhope, AL USA
After extensive recalculation, I have determined that the meaning of life is NOT 42! The secret of life, however is "enjoying the passage of time" (James Taylor)

Mark Goodwin
Seasoned Campaigner
Seasoned Campaigner
Posts: 408
Joined: Wed Jun 11, 2003 7:25 pm
Location: Squamish, B.C. Canada

Re: The Much Knattering & Far Twaddle Light Railway

Postby Mark Goodwin » Fri Apr 21, 2017 6:59 pm

Hi Team,

I didn't spot the deliberate mistake in the title. Much Knattering should read "Gnattering" in honour of Steve Bennet's GN15 (Pepper 7) "Gnat" locomotive. This was the first GN15 locomotive I purchased and I have a collection of Steve's other kits.

I then purchased a "Nellie" GN15 kit from Mike Rayner of Smallbrook and became addicted to the world of whimsical "Emettesque" and "Heath Robinson" railways.

But it all started with a "Gnat" - hence "Gnattering".

Happy modelling and to quote Juergen - have fun !! :D
Mark Goodwin
CEO Much Gnattering & far Twaddle Light Railway

southpier
True GnATTERbox
True GnATTERbox
Posts: 66
Joined: Tue Sep 06, 2011 12:52 am
Location: northeast coast
Interests: large scale narrow gauge micro layouts

Re: The Much Knattering & Far Twaddle Light Railway

Postby southpier » Fri Apr 21, 2017 10:09 pm

so following.. should it gnot be Gnellie?

Mark Goodwin
Seasoned Campaigner
Seasoned Campaigner
Posts: 408
Joined: Wed Jun 11, 2003 7:25 pm
Location: Squamish, B.C. Canada

Re: The Much Knattering & Far Twaddle Light Railway

Postby Mark Goodwin » Fri Apr 21, 2017 10:58 pm

Gnaturally following on it should be Gnellie

Nige
True GnATTERbox
True GnATTERbox
Posts: 31
Joined: Thu May 03, 2012 1:43 pm
Location: United Kingdom
Interests: Emett

Re: The Much Knattering & Far Twaddle Light Railway

Postby Nige » Wed May 10, 2017 4:14 pm

Mark

It's been a while - nice to see that you're still inspiring us!

One thing to bear in mind with the layout is to make sure you have some form of fence/wall around the edge in case the trains derail - I learned this one the hard way with poor Firestone having to undergo surgery to reattach his arm.

Like the others, I'm looking forward to seeing your progress with this.

Nigel
Nigel

User avatar
PeterH
GnatterBox Centurion
GnatterBox Centurion
Posts: 321
Joined: Sun Sep 28, 2008 6:54 am
Location: Auckland, New Zealand
Interests: Railway history, drinking beer

Re: The Much Knattering & Far Twaddle Light Railway

Postby PeterH » Thu May 11, 2017 9:26 am

Looking good. It's big for these pages.
Peter

Mark Goodwin
Seasoned Campaigner
Seasoned Campaigner
Posts: 408
Joined: Wed Jun 11, 2003 7:25 pm
Location: Squamish, B.C. Canada

Re: The Much Gnattering & Far Twaddle Light Railway

Postby Mark Goodwin » Sat May 13, 2017 7:32 pm

Hi fellow GN 15 modellers,

The layout progress plan is as follows:

Stage 1: Track laying, followed by wiring. Nothing moves forward until locomotives run and kadee coupling system functions.
Currently I'm unsure whether to fit point motors at an early stage or leave them till later. I like the PECO "Smartswitch" system. I intend to use live frogs on the turnouts - I'm keeping things simple at this time and don't plan to go digital just yet.

Stage 2: Scenery framing, and by this I mean scenery/fiddle yard concealment, board edge trim and above board lighting frame.

Stage 3: Scenery detailing - installation of ground/hills, followed by buildings/roads etc.

This is my first running layout since the very early days of my youth. The most precious commodity is time.

I'll place photos and updates on the forum as I move forward. I still get distracted with building Emett style locomotives, which is a pastime I really enjoy. I must balance this creative impulse with the more pressing requirement to see them run.
Ho hum, have fun,
Best regards
Mark

User avatar
Grum
True GnATTERbox
True GnATTERbox
Posts: 79
Joined: Fri Apr 29, 2016 6:05 pm
Location: Norfolk
Interests: Building and running exhibition layouts now in Gn15, previously in 009 scale narrow gauge for 34 years. I like steam locos and like to achieve a degree of realism. I am also interested in motor buses from 1945 to 1969.

Re: The Much Knattering & Far Twaddle Light Railway

Postby Grum » Sun May 14, 2017 9:30 pm

This looks as though it's going to be a brilliant layout Mark and I am looking forward to seeing it develop.
Nigel's comment about protecting the ends is well worth bearing in mind. I am going to trying all sorts of things to defend my trains on the end curves on my similar sized layout (well 7' 6" x 3' 3") "Longstone", which I will also take to exhibitions and will be vulnerable to "little hands" too. I may possibly have to use low perspex screens.
Best of luck with your modelling.
Graham

User avatar
John New
GnatterBox Centurion
GnatterBox Centurion
Posts: 352
Joined: Sun Oct 28, 2007 1:29 pm
Location: Portland, Dorset, UK
Interests: railways large and small.
Contact:

Re: The Much Knattering & Far Twaddle Light Railway

Postby John New » Mon May 15, 2017 12:21 pm

Layout protection

On my classic train set layout ( http://www.island-publishing.co.uk/dublo2.htm ) the Perspex screens I added at the front worked well to stop derails hitting the floor, small hands and my own flapping jacket! Another tip passed on, although the idea isn't mine as I got it IIRC from seeing it on one of Gordon Gravett's layouts, is flexible barriers (sproingers?). Use one of the cone springy door stops to hold a protruding dowel to hang a rope distanced off but along the layout front. The barrier is safe and flexible, the cone/dowell unscrews for transport. Quick and simple to mount when you find the venue has not organised barrier runs in front of layouts. I used home made free-standing uprights for my end stoppers using scrap pallet bases and a shortened broom handle to allow limited operator access to the front for reloading mailbags in the TPO. Varnished it did the trick at low cost.
John
http://www.stephensonloco.org.uk | http://www.yorkshow.org.uk | http://www.island-publishing.co.uk

Remembering it’s a hobby and I am allowed to smile!

Mark Goodwin
Seasoned Campaigner
Seasoned Campaigner
Posts: 408
Joined: Wed Jun 11, 2003 7:25 pm
Location: Squamish, B.C. Canada

Re: The Much Knattering & Far Twaddle Light Railway

Postby Mark Goodwin » Tue May 16, 2017 3:40 am

Hi team,

Thanks Graham and John for the advice. Off to Vancouver tomorrow for some layout wire and to see the availability and cost of the Peco "smartswitch" system.
Best regards,
Mark

Mark Goodwin
Seasoned Campaigner
Seasoned Campaigner
Posts: 408
Joined: Wed Jun 11, 2003 7:25 pm
Location: Squamish, B.C. Canada

Re: The Much Knattering & Far Twaddle Light Railway

Postby Mark Goodwin » Tue May 16, 2017 3:48 am

Hi team,

Another photo for scale purposes, i.e. what will a 1/24th scale GN15 train look like on a 4 X 8 baseboard. Note the Kadee coupling installed with a Dapol NEM mounting bracket between the guards van and passenger coach. A simple solution that avoids roof and buffer lock with the high coaches.
Image

Best regards,
Mark

southpier
True GnATTERbox
True GnATTERbox
Posts: 66
Joined: Tue Sep 06, 2011 12:52 am
Location: northeast coast
Interests: large scale narrow gauge micro layouts

Re: The Much Knattering & Far Twaddle Light Railway

Postby southpier » Wed May 17, 2017 9:34 am

this is beautiful modeling!

much more imagination than I possess

User avatar
Grum
True GnATTERbox
True GnATTERbox
Posts: 79
Joined: Fri Apr 29, 2016 6:05 pm
Location: Norfolk
Interests: Building and running exhibition layouts now in Gn15, previously in 009 scale narrow gauge for 34 years. I like steam locos and like to achieve a degree of realism. I am also interested in motor buses from 1945 to 1969.

Re: The Much Knattering & Far Twaddle Light Railway

Postby Grum » Wed May 24, 2017 4:47 pm

(Always late to reply...) Yes, I used those springy door stop & rope "barriers" all around my Whitsend Tramway layout for several years. They do work. Sometimes kids grab them, but as soon as they realise they have nothing to pull on, they just hold them innocently, no damage is done, and they keep them back from the front of the layout to watch it as it should be. Simple, and low-cost.

Mark Goodwin
Seasoned Campaigner
Seasoned Campaigner
Posts: 408
Joined: Wed Jun 11, 2003 7:25 pm
Location: Squamish, B.C. Canada

Re: The Much Knattering & Far Twaddle Light Railway

Postby Mark Goodwin » Fri May 26, 2017 1:12 am

Hi fellow GN15 modellers,

After some time away from the project, track laying has begun in earnest. I chose PECO O 16.5 7mm scale narrow gauge track because of its reliability and visual appearance when used with my Emett models (largely from Mike Rayner's Smallbrook Studios).

Having used foam insulation and foam track bed, my first nightmare was how to hold 21" radius curves with track pins that may not have too much of a grip in foam products. The solution was simple. I used "Woodland Scenics" foam adhesive and foam nails (large pins with a "T" shaped head) to hold the curve in place, installing them using a "Tracksetta" template. The pins were remove after the adhesive had set (24 hours). The adhesive dries clear and the appearance will be improved with ballasting.

The first photograph shows the system in place with a section of straight track, and the white adhesive can be seen. The track on the right has been cut and is ready for installation at a later date. The second photograph shows the curved section after the adhesive had dried.
Image

Image

After track laying, wiring will follow, and after testing, the installation of scenic breaks followed by full scenery.
Well that's all for now, have fun and stay happy, :lol:
Best regards,
Mark


Return to “Modelling Matters”

Who is online

Users browsing this forum: Bing [Bot] and 5 guests