Simplicity Sidings

For discussion of the issues faced when building a model or layout - how to replicate wood, what glues to use, exactly how much weathering can a Gnat take, a good source of detailing accessories - you get the picture, I'm sure.

Moderator: GnATTERbox Moderators

User avatar
Steve Bennett
Millegniumer
Millegniumer
Posts: 4512
Joined: Sat May 17, 2003 12:55 am
Location: Exeter, UK
Interests: railways?

Postby Steve Bennett » Thu Aug 27, 2009 2:02 pm

Ferns look like they could be very useful Bill. Not so sure about the mushrooms though, I find Peco track pins work very well after a coat of paint.
Steve Bennett
Sidelines
http://www.pepper7.com

User avatar
Gerry Bullock
Millegniumer
Millegniumer
Posts: 3220
Joined: Wed Jul 30, 2003 8:07 pm
Location: S.E.Essex
Interests: Gn15 and O Gauge at Club.

Postby Gerry Bullock » Thu Aug 27, 2009 3:26 pm

Yes Bill the Fly Agaric is considered poisonous, however the Celts and Druids used it to achieve highs. :roll: :roll: :roll:
As Busch are promoting this fungi maybe they have Druid connections. :twisted:

Mushrooms are also quite easy to make using Fimo and for a "waste not want not" solution I have one on Gneiss Farm that is the stalk end of a date. :wink:
So little time, so many ideas!!!!! GerryB.
http://gn15gnutt.blogspot.com/

User avatar
Steve Bennett
Millegniumer
Millegniumer
Posts: 4512
Joined: Sat May 17, 2003 12:55 am
Location: Exeter, UK
Interests: railways?

Postby Steve Bennett » Thu Sep 03, 2009 12:03 pm

Oh dear, a major distraction just arrived, think I might be having a play with these this evening :lol:

Image
Steve Bennett

Sidelines

http://www.pepper7.com

User avatar
rue_d_etropal
Millegniumer
Millegniumer
Posts: 2160
Joined: Fri Oct 07, 2005 4:55 pm
Location: Accrington and sometimes France
Interests: France, any narrow/minmum gauge 40cm,50cm , 60cm

Postby rue_d_etropal » Thu Sep 03, 2009 1:02 pm

just received some mini punches from eBay. Advertised as from Australia but packet of 3 treee leaf punches actually came from Hong Kong(probably quicker post as well) .
Cost was just over a £5 for the 3, including post, so they are cheap enough to play with.
I think these are the smallest punches available, and I think are probably about right size for 1/12th.
Just wondering how to fix down heaps of leaves now :roll:
Simon Dawson
(Simon D.),
Narrow gauge Francophile interested in 1m, 60cm,50cm , 40cm and smaller gauges . Build in scales from 1/6th to 1/24th. Also 1/32nd and 1/35th using 16.5mm track to represent 50cm and 60cm gauges.
http://www.rue-d-etropal.com

User avatar
Steve Bennett
Millegniumer
Millegniumer
Posts: 4512
Joined: Sat May 17, 2003 12:55 am
Location: Exeter, UK
Interests: railways?

Postby Steve Bennett » Fri Sep 04, 2009 3:09 pm

rue_d_etropal wrote:Just wondering how to fix down heaps of leaves now :roll:


As they are paper, an ordinary white glue should do the job, maybe even hairspray. To keep the loose look of piles of leaves, spraying with a dilute solution of white glue might be the best way to go. Not tried it, so I could be completely wrong :) but worth a play.
Steve Bennett

Sidelines

http://www.pepper7.com

User avatar
Steve Bennett
Millegniumer
Millegniumer
Posts: 4512
Joined: Sat May 17, 2003 12:55 am
Location: Exeter, UK
Interests: railways?

Postby Steve Bennett » Fri Sep 04, 2009 4:25 pm

The paper saga continues :roll: well, I couldnt resist a play with the new punches shown above :wink:

All the punches I got were from the "Xcut" range which seem quite popular here in the UK, but I'm sure there must be others which are similar. Mine came from http://www.bgpayne.com and took about a week incl the holiday weekend. They didn't have one of the punches I ordered and refunded the amount for that directly back to my Paypal account, no problems.

Here is a pic of the 5 punches, along with the bits they produce to give an idea of the relative sies.

Image

To help anybody who might be tempted along a similar path, here are the product # from left to right.

XCU-970 - Border Punch - Stars
XCU-9834 - Mini Punch - Four Stars
XCU-2611019 - Punch - Daisy Pattern
XCU-2581006 - Mini Punch - Daisy Pattern
XCU-969 - Punch - Holly

So thats the technical bit, time to play :lol: . Here are a few examples, I will give a few more details after the pic.

Image

Working from the left front, this is made with the Holly punch, another is just left of the purple flower. I found this one of the more difficult to use, but the effect is good. As the size of the leaves are quite big, it is possible to curve the leaves around a round former, I used the handle of a small paintbrush. With card, this does make them more difficult to fit the layers (3) together, paper might have been a better option.

Next the 3 large plants at the front, these are some of my favourites. They are made up of the 2 sizes of Daisy pattens. again it was possible to curve the leaves of the larger one, I was too lazy to try the smaller, but it doesnt really show. If I remember rightly, 3 large Daisies, and 3 smaller ones went into each plant.

OK, lets turn the display around for the next few.

Image

Starting in the centre with the one with the purple flower and the one on it's right. These were made up with the smaller Daisy punch, as were the dark ones to the right of the tree stump.
Moving further right, the Star shaped punches were used, the small punch for the 2 at the front, with the larger one made from the larger Star punch. The larger has 5 layers and the smaller are made up of 3.
Also showing up fairly well here, is the Holly leaved plant in the centre.

I hope it is obvious how much bigger these are than the original tiny plants I started with, which can be seen at the back right of the pic. These larger ones wont be suitable for too close to the rails, but intended more for general weeds away from the track.

I think I have probably posted enough on this subject (dont all agree :lol: ), but if anyone has any questions, just ask. I do hope that it will be useful and has provided a few ideas to experiment with.
Steve Bennett

Sidelines

http://www.pepper7.com

User avatar
Steve Bennett
Millegniumer
Millegniumer
Posts: 4512
Joined: Sat May 17, 2003 12:55 am
Location: Exeter, UK
Interests: railways?

Postby Steve Bennett » Tue Oct 13, 2009 5:27 pm

Just briefly revisting the paper plant subject :roll: sorry :lol: .
A bit of info (UK only) for anybody who might be looking for coloured paper. Popped into the local Lidl store yesterday, to find they have packs of 250 A4 sheets of 80 gsm coloured paper at £2.49. At a penny a sheet, thats the cheapest I have found, so if anybody needs a lifetime supply :?:
There are 10 different colours and 25 sheets of each. Laid out below, a swatch of each colour and I just had to try a flower in each to see how they looked :wink:

Image

Hopefully of use to some here, it fell just right for me, as following my demo at the weekend on making paper plants, I'm already getting bookings to give the demo at other shows next year :roll:
Steve Bennett

Sidelines

http://www.pepper7.com

Hans H
True GnATTERbox
True GnATTERbox
Posts: 88
Joined: Sun May 07, 2006 1:58 pm
Location: Västerås, Sweden
Interests: Narrow Gauge and off roading

Postby Hans H » Tue Oct 13, 2009 5:38 pm

:shock: ..gotta get me some of those...very useful
I bought a box of H0 flowers...so tiny...but this..now where talkin'

Very nice!!! :D

Cheers
Hans H
Cheers
Hans Hammarsten
Västerås, Sweden

underworld
GnatterBox Centurion
GnatterBox Centurion
Posts: 160
Joined: Wed Sep 23, 2009 2:23 pm
Location: NW Ohio, SE Michigan
Interests: narrow gauge everything...and standard gauge too!!!

Postby underworld » Wed Oct 14, 2009 3:26 am

Steve

You do amazing work with paper!!!


underworld
http://www.myspace.com/underworldimage
Currently on tour with Sleeper Cell

Sleeper Cell new album out soon!

Listen for me mornings 5:30-10 89Xradio.com
Shooting video for MTVs Making Of A Metal Band

steerngo
GnatterBox Centurion
GnatterBox Centurion
Posts: 102
Joined: Wed Jan 19, 2005 9:59 pm
Location: oswaldtwistle[up north]
Interests: most itams ng

Postby steerngo » Wed Oct 14, 2009 4:35 am

Steve Bennett wrote:Just briefly revisting the paper plant subject :roll: sorry :lol: .
A bit of info (UK only) for anybody who might be looking for coloured paper. Popped into the local Lidl store yesterday, to find they have packs of 250 A4 sheets of 80 gsm coloured paper at £2.49. At a penny a sheet, thats the cheapest I have found, so if anybody needs a lifetime supply :?:
There are 10 different colours and 25 sheets of each. Laid out below, a swatch of each colour and I just had to try a flower in each to see how they looked :wink:

Image

Hopefully of use to some here, it fell just right for me, as following my demo at the weekend on making paper plants, I'm already getting bookings to give the demo at other shows next year :roll:


lthay ook like the flowrers onthe MAGIC ROUNDABOUT

steerngo
GnatterBox Centurion
GnatterBox Centurion
Posts: 102
Joined: Wed Jan 19, 2005 9:59 pm
Location: oswaldtwistle[up north]
Interests: most itams ng

Postby steerngo » Wed Oct 14, 2009 4:37 am

steerngo wrote:
Steve Bennett wrote:Just briefly revisting the paper plant subject :roll: sorry :lol: .
A bit of info (UK only) for anybody who might be looking for coloured paper. Popped into the local Lidl store yesterday, to find they have packs of 250 A4 sheets of 80 gsm coloured paper at £2.49. At a penny a sheet, thats the cheapest I have found, so if anybody needs a lifetime supply :?:
There are 10 different colours and 25 sheets of each. Laid out below, a swatch of each colour and I just had to try a flower in each to see how they looked :wink:

Image

opefully of use to some here, it fell just right for me, as following my demo at the weekend on making paper plants, I'm already getting bookings to give the demo at other shows next year :roll:


thay ook like the flowrers onthe MAGIC ROUNDABOUT

User avatar
chris stockdale
Millegniumer
Millegniumer
Posts: 1149
Joined: Wed Jul 09, 2003 9:44 am
Location: Market Drayton, Shropshire, UK
Interests: most things narrow gauge, model or full size, especially 7 1/4" 'minimal' (which is sub Heywood ride on)

Postby chris stockdale » Wed Oct 14, 2009 6:31 am

steerngo wrote:
they look like the flowrers on the MAGIC ROUNDABOUT


Couldn't resist - lots of flowers, one being rolled from side to side in Ermintrude's mouth.... :D

http://www.youtube.com/watch?v=c3DcChXNyYQ

(Oh, and there's a train too)

cheers

User avatar
Steve Bennett
Millegniumer
Millegniumer
Posts: 4512
Joined: Sat May 17, 2003 12:55 am
Location: Exeter, UK
Interests: railways?

Postby Steve Bennett » Wed Oct 14, 2009 12:16 pm

:lol: Those were the days :lol:
A magic roundabout layout :?: No rails to worry about :lol:
Steve Bennett

Sidelines

http://www.pepper7.com

User avatar
Gerry Bullock
Millegniumer
Millegniumer
Posts: 3220
Joined: Wed Jul 30, 2003 8:07 pm
Location: S.E.Essex
Interests: Gn15 and O Gauge at Club.

Foxglove

Postby Gerry Bullock » Wed Nov 11, 2009 4:00 pm

Here's a Foxglove I made whilst out of contact.
Image
I doubt that I'll make another as it's just too time consuming and fiddly. :cry:
The photo shows the flower 5x size, I've also made some weeds however as these are 7mm they'll appear on the Dinas Mawddwy thread.
What I can suggest is another natural source and maybe now's the time to collect them - Alder seeds, I've waited a year for the 'bunch' to dry out then cutting the head off gives a good representation of a cabbage - need to paint it though.
GerryB
So little time, so many ideas!!!!! GerryB.

http://gn15gnutt.blogspot.com/

User avatar
dieselwater
Millegniumer
Millegniumer
Posts: 1021
Joined: Sun Sep 21, 2008 4:19 pm
Location: Taipei, Taiwan
Interests: Model railways, painting, guitar

Postby dieselwater » Wed Nov 11, 2009 4:05 pm

Wow! That's beautiful Gerry!
Little old lines to somewhere.

David.

User avatar
chris stockdale
Millegniumer
Millegniumer
Posts: 1149
Joined: Wed Jul 09, 2003 9:44 am
Location: Market Drayton, Shropshire, UK
Interests: most things narrow gauge, model or full size, especially 7 1/4" 'minimal' (which is sub Heywood ride on)

Re: Simplicity Sidings

Postby chris stockdale » Mon Nov 20, 2017 3:20 pm

I think P Bucket's system might have got wise to it but I've managed to grab (no, don't ask me how) some 20 of Steve's Simplicity Sidings photos out of the depths.
Attachments
HallingFit03.jpg
HallingFit03.jpg (64.03 KiB) Viewed 212 times
124.jpg
124.jpg (66.39 KiB) Viewed 212 times
121.jpg
121.jpg (49.02 KiB) Viewed 212 times
120.jpg
120.jpg (64.14 KiB) Viewed 212 times
119.jpg
119.jpg (74.8 KiB) Viewed 212 times
114.jpg
114.jpg (48 KiB) Viewed 212 times
113.jpg
113.jpg (69.54 KiB) Viewed 212 times
111.jpg
111.jpg (66.47 KiB) Viewed 212 times
089.jpg
089.jpg (27.99 KiB) Viewed 212 times
081.jpg
081.jpg (25.06 KiB) Viewed 212 times
078.jpg
078.jpg (16.75 KiB) Viewed 212 times
080.jpg
080.jpg (20.87 KiB) Viewed 212 times
077.jpg
077.jpg (18.41 KiB) Viewed 212 times
072.jpg
072.jpg (34.73 KiB) Viewed 212 times
049.jpg
049.jpg (25.84 KiB) Viewed 212 times
065.jpg
065.jpg (29.64 KiB) Viewed 212 times
048.jpg
048.jpg (23.99 KiB) Viewed 212 times
018.jpg
018.jpg (25.96 KiB) Viewed 212 times
007.jpg
007.jpg (26.11 KiB) Viewed 212 times
015a.jpg
015a.jpg (25.94 KiB) Viewed 212 times

User avatar
chris stockdale
Millegniumer
Millegniumer
Posts: 1149
Joined: Wed Jul 09, 2003 9:44 am
Location: Market Drayton, Shropshire, UK
Interests: most things narrow gauge, model or full size, especially 7 1/4" 'minimal' (which is sub Heywood ride on)

Re: Simplicity Sidings

Postby chris stockdale » Mon Nov 20, 2017 4:01 pm

Right, found a new way to get at what I want.

Expensive on my time and effort, but hopefully fellow Gnatterboxers will agree it's worth it.

What follows is not every photo by any means and you'll have to perhaps copy and paste Steve's 'words and music' into a separate doc (perhaps print it out so that you can read and look at the screen for the pics as you go) but I hope this will do something to recover what was a seminal piece of Gn15 work.

BUT (billions ope blistering barnacles in a thundering typhoon - for fans of Tintin) each set of pics seems to have loaded in reverse order, so you need to get a set in view and then go UP, not DOWN for the next pic in the order that work was done.

Bother!
Attachments
Screen Shot 2017-11-20 at 15.27.49.png
Screen Shot 2017-11-20 at 15.27.49.png (249.86 KiB) Viewed 206 times
Screen Shot 2017-11-20 at 15.27.34.png
Screen Shot 2017-11-20 at 15.27.34.png (412.79 KiB) Viewed 206 times
Screen Shot 2017-11-20 at 15.27.24.png
Screen Shot 2017-11-20 at 15.27.24.png (344.09 KiB) Viewed 206 times
Screen Shot 2017-11-20 at 15.27.12.png
Screen Shot 2017-11-20 at 15.27.12.png (482.68 KiB) Viewed 206 times
Screen Shot 2017-11-20 at 15.26.59.png
Screen Shot 2017-11-20 at 15.26.59.png (365.41 KiB) Viewed 206 times
Screen Shot 2017-11-20 at 15.26.47.png
Screen Shot 2017-11-20 at 15.26.47.png (321.72 KiB) Viewed 206 times
Screen Shot 2017-11-20 at 15.26.33.png
Screen Shot 2017-11-20 at 15.26.33.png (300.09 KiB) Viewed 206 times
Screen Shot 2017-11-20 at 15.26.20.png
Screen Shot 2017-11-20 at 15.26.20.png (366.88 KiB) Viewed 206 times
Screen Shot 2017-11-20 at 15.26.07.png
Screen Shot 2017-11-20 at 15.26.07.png (424.6 KiB) Viewed 206 times
Screen Shot 2017-11-20 at 15.25.54.png
Screen Shot 2017-11-20 at 15.25.54.png (278.15 KiB) Viewed 206 times

User avatar
chris stockdale
Millegniumer
Millegniumer
Posts: 1149
Joined: Wed Jul 09, 2003 9:44 am
Location: Market Drayton, Shropshire, UK
Interests: most things narrow gauge, model or full size, especially 7 1/4" 'minimal' (which is sub Heywood ride on)

Re: Simplicity Sidings

Postby chris stockdale » Mon Nov 20, 2017 4:08 pm

And the next set
Attachments
Screen Shot 2017-11-20 at 15.30.31.png
Screen Shot 2017-11-20 at 15.30.31.png (456.52 KiB) Viewed 206 times
Screen Shot 2017-11-20 at 15.30.13.png
Screen Shot 2017-11-20 at 15.30.13.png (589.52 KiB) Viewed 206 times
Screen Shot 2017-11-20 at 15.29.59.png
Screen Shot 2017-11-20 at 15.29.59.png (603.18 KiB) Viewed 206 times
Screen Shot 2017-11-20 at 15.29.46.png
Screen Shot 2017-11-20 at 15.29.46.png (564.49 KiB) Viewed 206 times
Screen Shot 2017-11-20 at 15.29.32.png
Screen Shot 2017-11-20 at 15.29.32.png (549.67 KiB) Viewed 206 times
Screen Shot 2017-11-20 at 15.29.03.png
Screen Shot 2017-11-20 at 15.29.03.png (569.61 KiB) Viewed 206 times
Screen Shot 2017-11-20 at 15.28.48.png
Screen Shot 2017-11-20 at 15.28.48.png (606.76 KiB) Viewed 206 times
Screen Shot 2017-11-20 at 15.28.27.png
Screen Shot 2017-11-20 at 15.28.27.png (231.44 KiB) Viewed 206 times
Screen Shot 2017-11-20 at 15.28.15.png
Screen Shot 2017-11-20 at 15.28.15.png (322.49 KiB) Viewed 206 times
Screen Shot 2017-11-20 at 15.28.02.png
Screen Shot 2017-11-20 at 15.28.02.png (161.27 KiB) Viewed 206 times

User avatar
chris stockdale
Millegniumer
Millegniumer
Posts: 1149
Joined: Wed Jul 09, 2003 9:44 am
Location: Market Drayton, Shropshire, UK
Interests: most things narrow gauge, model or full size, especially 7 1/4" 'minimal' (which is sub Heywood ride on)

Re: Simplicity Sidings

Postby chris stockdale » Mon Nov 20, 2017 4:11 pm

And the next set
Attachments
Screen Shot 2017-11-20 at 15.34.29.png
Screen Shot 2017-11-20 at 15.34.29.png (386.55 KiB) Viewed 205 times
Screen Shot 2017-11-20 at 15.34.13.png
Screen Shot 2017-11-20 at 15.34.13.png (494.61 KiB) Viewed 205 times
Screen Shot 2017-11-20 at 15.33.49.png
Screen Shot 2017-11-20 at 15.33.49.png (331.71 KiB) Viewed 205 times
Screen Shot 2017-11-20 at 15.33.20.png
Screen Shot 2017-11-20 at 15.33.20.png (487.59 KiB) Viewed 205 times
Screen Shot 2017-11-20 at 15.33.05.png
Screen Shot 2017-11-20 at 15.33.05.png (238.59 KiB) Viewed 205 times
Screen Shot 2017-11-20 at 15.32.54.png
Screen Shot 2017-11-20 at 15.32.54.png (546.81 KiB) Viewed 205 times
Screen Shot 2017-11-20 at 15.32.41.png
Screen Shot 2017-11-20 at 15.32.41.png (298.56 KiB) Viewed 205 times
Screen Shot 2017-11-20 at 15.32.15.png
Screen Shot 2017-11-20 at 15.32.15.png (539.61 KiB) Viewed 205 times
Screen Shot 2017-11-20 at 15.32.04.png
Screen Shot 2017-11-20 at 15.32.04.png (766.76 KiB) Viewed 205 times
Screen Shot 2017-11-20 at 15.31.47.png
Screen Shot 2017-11-20 at 15.31.47.png (509.57 KiB) Viewed 205 times
Screen Shot 2017-11-20 at 15.31.34.png
Screen Shot 2017-11-20 at 15.31.34.png (642.91 KiB) Viewed 205 times
Screen Shot 2017-11-20 at 15.31.17.png
Screen Shot 2017-11-20 at 15.31.17.png (548.13 KiB) Viewed 205 times
Screen Shot 2017-11-20 at 15.30.53.png
Screen Shot 2017-11-20 at 15.30.53.png (376.64 KiB) Viewed 205 times
Screen Shot 2017-11-20 at 15.30.41.png
Screen Shot 2017-11-20 at 15.30.41.png (362.11 KiB) Viewed 205 times

User avatar
chris stockdale
Millegniumer
Millegniumer
Posts: 1149
Joined: Wed Jul 09, 2003 9:44 am
Location: Market Drayton, Shropshire, UK
Interests: most things narrow gauge, model or full size, especially 7 1/4" 'minimal' (which is sub Heywood ride on)

Re: Simplicity Sidings

Postby chris stockdale » Mon Nov 20, 2017 4:19 pm

And the next set
Attachments
Screen Shot 2017-11-20 at 15.39.56.png
Screen Shot 2017-11-20 at 15.39.56.png (354.15 KiB) Viewed 205 times
Screen Shot 2017-11-20 at 15.39.38.png
Screen Shot 2017-11-20 at 15.39.38.png (635.8 KiB) Viewed 205 times
Screen Shot 2017-11-20 at 15.39.07.png
Screen Shot 2017-11-20 at 15.39.07.png (559.52 KiB) Viewed 205 times
Screen Shot 2017-11-20 at 15.38.30.png
Screen Shot 2017-11-20 at 15.38.30.png (640.35 KiB) Viewed 205 times
Screen Shot 2017-11-20 at 15.37.41.png
Screen Shot 2017-11-20 at 15.37.41.png (573.99 KiB) Viewed 205 times
Screen Shot 2017-11-20 at 15.37.29.png
Screen Shot 2017-11-20 at 15.37.29.png (557.6 KiB) Viewed 205 times
Screen Shot 2017-11-20 at 15.37.14.png
Screen Shot 2017-11-20 at 15.37.14.png (285.47 KiB) Viewed 205 times
Screen Shot 2017-11-20 at 15.36.54.png
Screen Shot 2017-11-20 at 15.36.54.png (605.38 KiB) Viewed 205 times
Screen Shot 2017-11-20 at 15.36.34.png
Screen Shot 2017-11-20 at 15.36.34.png (434.35 KiB) Viewed 205 times
Screen Shot 2017-11-20 at 15.36.19.png
Screen Shot 2017-11-20 at 15.36.19.png (420.41 KiB) Viewed 205 times
Screen Shot 2017-11-20 at 15.35.53.png
Screen Shot 2017-11-20 at 15.35.53.png (390.53 KiB) Viewed 205 times
Screen Shot 2017-11-20 at 15.35.38.png
Screen Shot 2017-11-20 at 15.35.38.png (578.61 KiB) Viewed 205 times
Screen Shot 2017-11-20 at 15.35.23.png
Screen Shot 2017-11-20 at 15.35.23.png (186.71 KiB) Viewed 205 times
Screen Shot 2017-11-20 at 15.34.42.png
Screen Shot 2017-11-20 at 15.34.42.png (329.69 KiB) Viewed 205 times

User avatar
chris stockdale
Millegniumer
Millegniumer
Posts: 1149
Joined: Wed Jul 09, 2003 9:44 am
Location: Market Drayton, Shropshire, UK
Interests: most things narrow gauge, model or full size, especially 7 1/4" 'minimal' (which is sub Heywood ride on)

Re: Simplicity Sidings

Postby chris stockdale » Mon Nov 20, 2017 4:22 pm

And finally...
Attachments
Screen Shot 2017-11-20 at 15.45.21.png
Screen Shot 2017-11-20 at 15.45.21.png (590.83 KiB) Viewed 205 times
Screen Shot 2017-11-20 at 15.44.51.png
Screen Shot 2017-11-20 at 15.44.51.png (458.38 KiB) Viewed 205 times
Screen Shot 2017-11-20 at 15.44.34.png
Screen Shot 2017-11-20 at 15.44.34.png (548.48 KiB) Viewed 205 times
Screen Shot 2017-11-20 at 15.44.11.png
Screen Shot 2017-11-20 at 15.44.11.png (477.87 KiB) Viewed 205 times
Screen Shot 2017-11-20 at 15.43.55.png
Screen Shot 2017-11-20 at 15.43.55.png (503.26 KiB) Viewed 205 times
Screen Shot 2017-11-20 at 15.43.40.png
Screen Shot 2017-11-20 at 15.43.40.png (327.68 KiB) Viewed 205 times
Screen Shot 2017-11-20 at 15.42.55.png
Screen Shot 2017-11-20 at 15.42.55.png (524.21 KiB) Viewed 205 times
Screen Shot 2017-11-20 at 15.42.38.png
Screen Shot 2017-11-20 at 15.42.38.png (753.07 KiB) Viewed 205 times
Screen Shot 2017-11-20 at 15.42.26.png
Screen Shot 2017-11-20 at 15.42.26.png (683.03 KiB) Viewed 205 times
Screen Shot 2017-11-20 at 15.42.15.png
Screen Shot 2017-11-20 at 15.42.15.png (512.33 KiB) Viewed 205 times
Screen Shot 2017-11-20 at 15.42.02.png
Screen Shot 2017-11-20 at 15.42.02.png (676.33 KiB) Viewed 205 times
Screen Shot 2017-11-20 at 15.41.40.png
Screen Shot 2017-11-20 at 15.41.40.png (747.55 KiB) Viewed 205 times
Screen Shot 2017-11-20 at 15.41.30.png
Screen Shot 2017-11-20 at 15.41.30.png (525.49 KiB) Viewed 205 times
Screen Shot 2017-11-20 at 15.41.15.png
Screen Shot 2017-11-20 at 15.41.15.png (304.05 KiB) Viewed 205 times
Screen Shot 2017-11-20 at 15.40.47.png
Screen Shot 2017-11-20 at 15.40.47.png (398.69 KiB) Viewed 205 times
Screen Shot 2017-11-20 at 15.40.31.png
Screen Shot 2017-11-20 at 15.40.31.png (379.63 KiB) Viewed 205 times

User avatar
michael
Millegniumer
Millegniumer
Posts: 1852
Joined: Sat Nov 06, 2004 4:10 pm
Location: Alberta Canada
Interests: Gn15

Re: Simplicity Sidings

Postby michael » Mon Nov 20, 2017 6:43 pm

Chris thanks for doing this. I gnow that Steve used the Brick Printies that I came up with for some early Macton work here they are again

new macton bricks office.jpg
new macton bricks office.jpg (414.14 KiB) Viewed 195 times


new macton door  bricks.jpg
new macton door bricks.jpg (731.9 KiB) Viewed 195 times


new macton bricks paintshop.jpg
new macton bricks paintshop.jpg (508.85 KiB) Viewed 195 times


Michael
Regards Michael
If you believe you can make something, you can make it.

http://users.xplornet.com/~macton/index.html

User avatar
chris stockdale
Millegniumer
Millegniumer
Posts: 1149
Joined: Wed Jul 09, 2003 9:44 am
Location: Market Drayton, Shropshire, UK
Interests: most things narrow gauge, model or full size, especially 7 1/4" 'minimal' (which is sub Heywood ride on)

Re: Simplicity Sidings

Postby chris stockdale » Mon Nov 20, 2017 6:47 pm

michael wrote:Chris thanks for doing this. I gnow that Steve used the Brick Printies that I came up with for some early Macton work here they are again




Well, that’s a little snippet I didn’t know.

Thanks for popping them in.

Cheers,


Return to “Modelling Matters”

Who is online

Users browsing this forum: Bing [Bot] and 1 guest