Moderator: GnATTERbox Moderators
Dallas_M wrote: Goal for this winter is to finish the "Uncle Buck" rail truck
Prof Klyzlr wrote:Bearing in mind the sub 12" dia wheels on some mining equipment, I would have thought the S1's wheels/trucks would have fit in nicely in Gn15, maybe with some oversized brake cylinders and axlebox covers added
(I know adding tramway skirting is the easy option,
but there's something about not being able to see the wheels/trucks move as the loco glides/rocks around the layout... )
Dallas_M wrote:Yes, those rivets do look the same. I used Grandt Line #156 Rivets for most of the cab. They are .063" diameter ... and if my math is correct, that's very close to 1.5 mm.
Dallas_M wrote:Overall length of the frame is a little over 5-3/4" long ... about 14.8 cm.
mad gerald wrote:What size does it reach in heigth, I mean, are your engineers supposed to drive it upright (or sitting)?
I'm still in doubt with the window shapes
mad gerald wrote:The height of my front/rear parts of my cab (cab/twin cab/box cab - I'm still not quite sure) is approx. 85mm and seemed really tall to me. The left one is the laser cut part from my acryl kit, the right one is handcrafted by me:
Users browsing this forum: No registered users and 5 guests