My first STEAMER

For discussion of the issues faced when building a model or layout - how to replicate wood, what glues to use, exactly how much weathering can a Gnat take, a good source of detailing accessories - you get the picture, I'm sure.

Moderator: GnATTERbox Moderators

User avatar
chris stockdale
Millegniumer
Millegniumer
Posts: 1145
Joined: Wed Jul 09, 2003 9:44 am
Location: Market Drayton, Shropshire, UK
Interests: most things narrow gauge, model or full size, especially 7 1/4" 'minimal' (which is sub Heywood ride on)

Postby chris stockdale » Sat Jun 02, 2012 10:01 am

I really like the 'look' you have developed for both loco and stock. I think my favourite is the box van.

bestest,

User avatar
Gerry Bullock
Millegniumer
Millegniumer
Posts: 3220
Joined: Wed Jul 30, 2003 8:07 pm
Location: S.E.Essex
Interests: Gn15 and O Gauge at Club.

Postby Gerry Bullock » Tue Jun 05, 2012 2:01 pm

You have a great set of wagons there Chris. 8)
So little time, so many ideas!!!!! GerryB.
http://gn15gnutt.blogspot.com/

User avatar
chris69
Demi-Millegniumer
Demi-Millegniumer
Posts: 550
Joined: Sat Aug 11, 2007 7:06 pm
Location: Hollywood CA/just moved
Interests: any thing with narrow gauge and quarries

OH....sht

Postby chris69 » Fri Jun 08, 2012 6:22 am

Well I screwed up.The Open gondola car will now be a coal storage.I found out that the wheel base is to long and by no means will it go around 9 1/2 inch radius curves.Oh well,salvaged the HO chassis that came from the Magic Train Car I used,shortened it and we'll see.The top part of the car will get a foundation and now serve as a coal storage on any future layout.
LIVE AN LEARN.....
Greetings
Chris :oops: :oops: :oops: :oops: :oops: :lol: :shock:
It's my RR and it exists,in my mind!!!!!!!!

User avatar
chris69
Demi-Millegniumer
Demi-Millegniumer
Posts: 550
Joined: Sat Aug 11, 2007 7:06 pm
Location: Hollywood CA/just moved
Interests: any thing with narrow gauge and quarries

Postby chris69 » Fri Jun 22, 2012 4:15 am

Happy evening/day ....
Well,I recycled the Magic Train chassis and turned it in to a side unloading
Coal Car.

Image

Image

I also had a pair of 3 axle trucks from an HO torpedo car and a Bachman log chassis added a card stock dump body. Dressed it up with some Plastruct parts
and we have a slag car.

Image

Image

I think it will all go in to some metal working industry module. I have some ideas based on Vulcan Iron Works but space restrictions will require some modifications.Thus the transfer table question.
As to the rolling stock.I am presently building a loco that will handle the slag traffic.Next will be a few more ore cars (2-3 max) and one more slag car.

Have a good one and thanks again for the help.
Chris :roll: :roll: :oops: :lol:
It's my RR and it exists,in my mind!!!!!!!!

User avatar
Glen A
Millegniumer
Millegniumer
Posts: 1311
Joined: Wed May 02, 2007 8:34 pm
Location: Christchurch, New Zealand
Interests: Gn15, G 1:24

Postby Glen A » Fri Jun 22, 2012 6:29 am

As usual, your rust and weathering work is outstanding!
8)

User avatar
chris69
Demi-Millegniumer
Demi-Millegniumer
Posts: 550
Joined: Sat Aug 11, 2007 7:06 pm
Location: Hollywood CA/just moved
Interests: any thing with narrow gauge and quarries

Postby chris69 » Fri Jun 22, 2012 7:08 am

Hi Glen,
thanks.But some of the praise has to go to a friend of mine Christoph(also on this forum),his method of treating the card stock with super glue is an integral part of the whole process.It gives it a metallic surface structure.Next a base coat of what ever color you desire(cheap car primer for me) and then I use a 2 part process with the stuff called:
Sophisticated Finishes by Triangle Coatings Inc .One is Metallic surfacer the other is antiquing rust solution.
They tell you in the instructions to let it dry over night,well I use the hair dryer on high and depending on the desired result put on multiple coats of the finisher.Then I let it dry over night.In the morning I put it outside for about an hour or 2.The moisture in the air changes the finish ,usually to the desired result.Next comes the final touch up with pigments and a final coat of Lusterless Flat.It seals the pigment and stops the "rusting" which will go on for some time.

All the best
Chris
:roll: :roll: :lol:
It's my RR and it exists,in my mind!!!!!!!!

User avatar
dieselwater
Millegniumer
Millegniumer
Posts: 1021
Joined: Sun Sep 21, 2008 4:19 pm
Location: Taipei, Taiwan
Interests: Model railways, painting, guitar

Postby dieselwater » Fri Jun 22, 2012 9:08 am

Great looking wagons Chris 8) The way you've photographed them with the base and backdrop makes them look real.
Little old lines to somewhere.

David.

User avatar
chris69
Demi-Millegniumer
Demi-Millegniumer
Posts: 550
Joined: Sat Aug 11, 2007 7:06 pm
Location: Hollywood CA/just moved
Interests: any thing with narrow gauge and quarries

Miracles happen....

Postby chris69 » Fri Jul 13, 2012 12:09 am

Happy day/evening/noon.....
well I thought that my first steamer was a FREE LANCER,well I found out I was wrong.
Looking through some old issues of the German Magazine:
Der Mittel Puffer No 26

On page 40 in the book section I found this picture

Image

sorry for the bad quality.I photographed it from a 6cmX4cm original

Image

here is one of my pictures for comparison,she is not quite finished yet in this picture.But one gets the idea.
All the best
Chris :lol: :lol: :oops: :oops: :oops:
It's my RR and it exists,in my mind!!!!!!!!

rockershovel
True GnATTERbox
True GnATTERbox
Posts: 80
Joined: Mon Dec 21, 2009 7:56 am
Interests: narrow gauge industrial railways

Postby rockershovel » Sun Jul 29, 2012 7:53 pm

the Sittingbourne Bagnall 2-4-0F would suit the protruding motor http://www.flickr.com/photos/21640011@N07/6859472007/
rambling miner

User avatar
chris69
Demi-Millegniumer
Demi-Millegniumer
Posts: 550
Joined: Sat Aug 11, 2007 7:06 pm
Location: Hollywood CA/just moved
Interests: any thing with narrow gauge and quarries

Postby chris69 » Sun Jul 29, 2012 10:53 pm

Thanks, and the imagineering machine is on full speed again.
Great pictures.
have a great weekend

Chris :lol: :lol: :oops: 8)
It's my RR and it exists,in my mind!!!!!!!!

User avatar
Willow Creek Traction
Demi-Millegniumer
Demi-Millegniumer
Posts: 923
Joined: Wed Feb 07, 2007 5:14 am
Location: Boonville, Missouri, USA
Interests: HO, On30, G/Hn15, regular G, kites, model rockets, the occasional model boat, retro sci-fi miniatures game.

Postby Willow Creek Traction » Sat Aug 04, 2012 10:28 pm

Hi Chris, looks like you have a good thing growing.

Do wonder about that one car where it appears sideframe is below rail level. guaranteed to not make it through switches.

Image
later, Forrest Today's scientists have substituted mathematics for experiments, and they wander off through equation after equation, and eventually build a structure which has no relation to reality. -- Nikola Tesla, July, 1934

User avatar
chris69
Demi-Millegniumer
Demi-Millegniumer
Posts: 550
Joined: Sat Aug 11, 2007 7:06 pm
Location: Hollywood CA/just moved
Interests: any thing with narrow gauge and quarries

Frame

Postby chris69 » Sun Aug 05, 2012 4:10 pm

Hi,
well you are so right.This was just a short lived version of the car.I removed the trucks and changed it back to a 2 axle version.Had the car body been 10MM longer the 4 axle one would have worked..Love the HEAVY look but it just was no to be.

Greetings
Chris :roll: :roll: :lol: 8)
It's my RR and it exists,in my mind!!!!!!!!

User avatar
kevo
GnatterBox Centurion
GnatterBox Centurion
Posts: 119
Joined: Sun Jun 02, 2013 7:01 pm
Location: east sussex
Interests: gn 15 132 scale 135 scale

Re: My first STEAMER

Postby kevo » Fri Jan 12, 2018 6:16 pm

Hi chris came across your fireless loco . really brilliant got me think ing that some time back I to had a rivarossi chassi the same .after a good hunt round bingo ! I found it . and thought wouldn't mind have ing a bash at a fireless loco my self . but would like to convert chassi to DCC
DSCF0716.JPG
DSCF0716.JPG (322.82 KiB) Viewed 49 times
DSCF0716.JPG
DSCF0716.JPG (322.82 KiB) Viewed 49 times
. I have converted a few 0-4-0's by follow ing idiot proof guides but this one looks a bit different like wheel pick ups on one side only . has any one had a go at a conversion on this type be for . or is it one of those split frame pick ups . any advice or hints please
Attachments
DSCF0717.JPG
DSCF0717.JPG (263.28 KiB) Viewed 49 times
kevin piper


Return to “Modelling Matters”

Who is online

Users browsing this forum: No registered users and 1 guest

cron