Did anyone use Kato R150 curved track for a very small G9 layout ?
Thanks for your replies.
Kato R150 curved track
Moderator: ian holmes
-
docnjoj
- Demi-Millegniumer
- Posts: 751
- Joined: Sun Jan 14, 2007 3:03 pm
- Location: Fairhope AL
- Interests: used to model 7/8 scale but now am definitely hooked on GN15 as my only scale until now. G9 has appeared.
Re: Kato R150 curved track
I'm working on one (slowly) with their oval and some tram turnouts. Very high quality stuff. The 6 inch radius works fine with most 4-6 wheel power units and N gauge chassis.
otherDoc
otherDoc
David (Doc)
Fairhope, AL USA
After extensive recalculation, I have determined that the meaning of life is NOT 42! The secret of life, however is "enjoying the passage of time" (James Taylor)
Fairhope, AL USA
After extensive recalculation, I have determined that the meaning of life is NOT 42! The secret of life, however is "enjoying the passage of time" (James Taylor)
Re: Kato R150 curved track
docnjoj wrote:The 6 inch radius works fine with most 4-6 wheel power units and N gauge chassis.
otherDoc
Does it work with a Kato 11-103 tram chassis unit
-
docnjoj
- Demi-Millegniumer
- Posts: 751
- Joined: Sun Jan 14, 2007 3:03 pm
- Location: Fairhope AL
- Interests: used to model 7/8 scale but now am definitely hooked on GN15 as my only scale until now. G9 has appeared.
Re: Kato R150 curved track
Yes I have a 103 and a 104 and they both work fine. Weight helps the smoothness. I use radio and a battery as weight.
David (Doc)
David (Doc)
David (Doc)
Fairhope, AL USA
After extensive recalculation, I have determined that the meaning of life is NOT 42! The secret of life, however is "enjoying the passage of time" (James Taylor)
Fairhope, AL USA
After extensive recalculation, I have determined that the meaning of life is NOT 42! The secret of life, however is "enjoying the passage of time" (James Taylor)
Re: Kato R150 curved track
Good news 
Thanks.
Thanks.-
rue_d_etropal
- Millegniumer
- Posts: 2166
- Joined: Fri Oct 07, 2005 4:55 pm
- Location: Accrington and sometimes France
- Interests: France, any narrow/minmum gauge 40cm,50cm , 60cm
Re: Kato R150 curved track
don't forget the tomix tracksystem. Smaller radius than the JKato, and they do sleepered and inset. Tomix inset track
sleepered track set
sleepered track set
Simon Dawson
(Simon D.),
Narrow gauge Francophile interested in 1m, 60cm,50cm , 40cm and smaller gauges . Build in scales from 1/6th to 1/24th. Also 1/32nd and 1/35th using 16.5mm track to represent 50cm and 60cm gauges.
http://www.rue-d-etropal.com
(Simon D.),
Narrow gauge Francophile interested in 1m, 60cm,50cm , 40cm and smaller gauges . Build in scales from 1/6th to 1/24th. Also 1/32nd and 1/35th using 16.5mm track to represent 50cm and 60cm gauges.
http://www.rue-d-etropal.com
Re: Kato R150 curved track
Good advice. Thanks.
-
rue_d_etropal
- Millegniumer
- Posts: 2166
- Joined: Fri Oct 07, 2005 4:55 pm
- Location: Accrington and sometimes France
- Interests: France, any narrow/minmum gauge 40cm,50cm , 60cm
Re: Kato R150 curved track
this topic might be of interest
http://forum.gn15.info/viewtopic.php?f=10&t=2737&hilit=rue_d_etropal
http://forum.gn15.info/viewtopic.php?f=10&t=2737&hilit=rue_d_etropal
Simon Dawson
(Simon D.),
Narrow gauge Francophile interested in 1m, 60cm,50cm , 40cm and smaller gauges . Build in scales from 1/6th to 1/24th. Also 1/32nd and 1/35th using 16.5mm track to represent 50cm and 60cm gauges.
http://www.rue-d-etropal.com
(Simon D.),
Narrow gauge Francophile interested in 1m, 60cm,50cm , 40cm and smaller gauges . Build in scales from 1/6th to 1/24th. Also 1/32nd and 1/35th using 16.5mm track to represent 50cm and 60cm gauges.
http://www.rue-d-etropal.com
Re: Kato R150 curved track
Thanks for the link.
Who is online
Users browsing this forum: No registered users and 3 guests