Want to talk about Sir Arthur Heywood's 15" gauge railways? About modern day minimum gauge lines? Have you found a minimum gauge line you've not seen mentioned on the website? Want directions to one of the railways that is mentioned? Whatever your interest in real minimum gauge lines, post your questions (and answer other modellers' questions) here.
Moderator: GnATTERbox Moderators
- True GnATTERbox
- Posts: 92
- Joined: Sun Jun 14, 2015 10:45 pm
- Location: Wellington NZ
I've been doing some research, the railway is at Lebong Tandai and is now 600mm gauge but was originally 500mm. Once had a vast range of locomotives including some very usual Simplex.
The current rolling stock are known at Molek = Motor Lori Ekspres.
- GnatterBox Centurion
- Posts: 331
- Joined: Sun Dec 12, 2010 11:07 pm
- Location: Brittany
- Interests: just about every scale you can think of....
cute trains generally
If it's the line I think it is it was originally overhead electric with little O&K locos.
I may have some photos somewhere.
To know the meaning of life you need not to be dealt a good hand, but rather to play the worthless hand you have been dealt to the best of your ability.
- Posts: 2163
- Joined: Fri Oct 07, 2005 4:55 pm
- Location: Accrington and sometimes France
- Interests: France, any narrow/minmum gauge 40cm,50cm , 60cm
Doubt if it was originally 50cm gauge, so googled it, and found thishttp://www.internationalsteam.co.uk/tales/indonesiatales01.htm
Turn out the mine section was 50cm but the rest has alwaysbeen 60cm gauge.
I think if you exhibied a layout with these railcars(??), people would not believe they existed. Sometimes fact is stranger than fiction.
Narrow gauge Francophile interested in 1m, 60cm,50cm , 40cm and smaller gauges . Build in scales from 1/6th to 1/24th. Also 1/32nd and 1/35th using 16.5mm track to represent 50cm and 60cm gauges. http://www.rue-d-etropal.com
Return to “Prototype Prattles”
Who is online
Users browsing this forum: No registered users and 1 guest