(F) Jubilee Track Sleepers

Want to talk about Sir Arthur Heywood's 15" gauge railways? About modern day minimum gauge lines? Have you found a minimum gauge line you've not seen mentioned on the website? Want directions to one of the railways that is mentioned? Whatever your interest in real minimum gauge lines, post your questions (and answer other modellers' questions) here.

Moderator: GnATTERbox Moderators

User avatar
gfadvance
Demi-Millegniumer
Demi-Millegniumer
Posts: 533
Joined: Thu May 17, 2007 2:38 pm
Location: Manchester, UK
Interests: Models of all sorts boats, planes and now G15

(F) Jubilee Track Sleepers

Postby gfadvance » Sat Dec 11, 2010 7:59 pm

Evening,

I am doing some research for a future project and trying to get some "typical" dimensions for the metal sleepers used in "Jubilee" track ... somewhere in my brain I have the idea that they were in the region of 3ft 6 inches long and about 6 inches wide (width being the total width of sleeper not just the top that the rail sits on).

Anybody out point me the right direction for more information?

Thanks
Gordon F

User avatar
Trevor Coburn
GnatterBox Centurion
GnatterBox Centurion
Posts: 328
Joined: Sun Sep 16, 2007 4:15 pm
Location: West Africa & (sometimes) N.Somerset UK
Interests: Modeling Narrow Gauge Railways,

Postby Trevor Coburn » Sun Dec 12, 2010 4:12 pm

Pressed steel sleepers: [6” x 3”, 175mm x 80mm] gauges below 650mm: Length = track gauge + 600mm, rail weight 25 – 30 lb /yd , 12 – 14kg /m

Flat steel sleepers, [100mm x 20mm] gauges below 650mm: Track gauge + 200mm, rail weight 12 -20 lb /yd, 5 – 10kg/m

Wood sleepers, [130 x 100] 2.2 x track gauge long

Rail length 16ft / 5m.

Rail Height 12lb = 2” /50mm, [in 1:24 scale =code 83] 20lb = 2½” / 65mm, [=code 100], 30lb = 2¾” / 70mm,[=code 115]

Sleeper spacing (18”/500mm gauge.) 18” - 24” 500 – 600mm. (Although this dimension can vary on axle loading)

All based on DIN standards.
I hope this helps.
Trevor
Member of The Royal Institute of Grumpy Old Men

DuffieldBank
GnatterBox Centurion
GnatterBox Centurion
Posts: 100
Joined: Sat Apr 14, 2012 6:45 pm
Location: das Amerikas
Interests: Gn15, miniature railways, live steam, anything Heywood
Contact:

Re: (F) Jubilee Track Sleepers

Postby DuffieldBank » Tue Mar 17, 2015 10:05 pm

Amazing how 5 years after the fact, this information becomes useful to me.

=)
I like pie.

User avatar
rue_d_etropal
Millegniumer
Millegniumer
Posts: 2160
Joined: Fri Oct 07, 2005 4:55 pm
Location: Accrington and sometimes France
Interests: France, any narrow/minmum gauge 40cm,50cm , 60cm

Re: (F) Jubilee Track Sleepers

Postby rue_d_etropal » Thu Mar 19, 2015 9:52 am

I think that is why this forum is an important source of info.
One of my many projects is to design some of this type of track for 3D printing. My experiment with ultra tight radius proved the WSF plastic is strong enough to hold the rail as long as the rail is pre-bent. Looking through the sources, even just Decauville and there are many different sleeper profiles, so I really need to get my other design work finished before I start on Jubilee track.
Simon Dawson
(Simon D.),
Narrow gauge Francophile interested in 1m, 60cm,50cm , 40cm and smaller gauges . Build in scales from 1/6th to 1/24th. Also 1/32nd and 1/35th using 16.5mm track to represent 50cm and 60cm gauges.
http://www.rue-d-etropal.com

User avatar
ChrisMears
True GnATTERbox
True GnATTERbox
Posts: 72
Joined: Wed Dec 17, 2003 3:15 pm
Location: Charlottetown, Prince Edward Island - Canada
Interests: Model Railways, Information Graphics, Brewing

Re: (F) Jubilee Track Sleepers

Postby ChrisMears » Wed Aug 12, 2015 12:42 pm

Thanks for posting these dimensions. I had previously downloaded the scanned copy of the Hudson catalogue from the CaneSIG website. The catalogue includes a superb collection of full scale sections through items like the steel sleepers and some equally fantastic notes on spacing but nothing on the length of the sleeper itself. Now I have the missing piece of the puzzle.

Thanks!
Chris Mears
----------------------
PrinceStreet.wordpress.com
Charlottetown, PEI


Return to “Prototype Prattles”

Who is online

Users browsing this forum: No registered users and 1 guest

cron